The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

1G Car shaking intermittently

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ShakeyTalon

Probationary Member
7
0
Feb 14, 2005
Macon, Georgia
If this has been answered before I'm sorry, for some reason the search feature wasn't working all that well for me.

The car, 90 Eagle Talon TSi AWD/LSD/5sp w/6-bolt cyclone swap

The problem:
Basically the car will begin to shake as if its coming apart and I can hear a pretty good thumping noise. I can pull off the road and stop and immediately take back off w/no vibration or thumping noise whatsoever, but it will come back intermittently, could come back a mile down the road, could come back 10 miles down the road. It does it in gear and out of gear and still pulls while in gear if i press the gas.

I'm leaning towards carrier bearings but just thought I would get yall's thoughts on this problem, we have a local "DSM shootout" coming up Apr 3 and I HAVE to be there

Thanks in advance
shakey
 
Last edited by a moderator:
If you can isolate where its coming from, that would clue you in alot easier. But crawl under there and take a look at the carrier bearings if your leaning that way. In a car of its age, I would be more surprised if they were in good shape. See if they visibly sag, they should be roughly centered. Drivers side motor mount always breaks on these cars as well, if it hasn't been replaced already.
 
Yea, all mounts were replaced w/the swap.

I can clearly push the shaft up and down, as well as side to side right at the lobro joint/rear carrier bearing and I can see somewhat where its been smacking around in that area.

Before all this happened you could feel a vibration near the rear of the car under acceleration.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 4G63 3 inch Magnaflow SS high flow cat
    3 inch Magnaflow stainless cat. High flow. 18.25 inches. Flange holes are 4 1/8 center. Has...
    • Galant665
    • Updated:
  • For sale 4G63 Forge Motorsports BOV
    Original Forge Motorsports bov. Adjustable with over 80 clicks on the dial. Nice to use for...
    • Galant665
    • Updated:
  • Wanted 1g 1991 Black Cherry Eagle Talon
    5-speed
    • bamatalon
    • Updated:
    • Expires
  • For sale Misc Left Over Parts
    Hello, I have a few left over parts for sale, these do not include shipping, please pm me for a...
    • r3dmak
    • Updated:
    • Expires
  • For sale Alpha Injection Clinic 2200cc for 4G63 DSM/EVO
    I have a set of Alpha Injection Clinic 2200cc high z injectors for DSM/EVO. I am stepping up to...
    • spoolinpos
    • Updated:
    • Expires
Back
Top