The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Can someone ID my oilpan

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

DeezNutsForYou

20+ Year Contributor
282
0
Oct 31, 2002
Can someone ID my oil pan as a 6 or a 7 bolt please. I can't tell. Here are some OK pics, hopefully this will be enough to tell. But if there is anythang else I could take a pic of to ID it, please let me know and I'll quickly post it. I need to know which block I have because I'm about to swap the clutch, and flywheel.
thanks for the help
-Josh
 

Attachments

You must be registered for see attachments list
You say you have a 92... so im going to say 6 bolt. THe 7 bolts weren;t used until late 94's and in all 2G's
 
ok, that is wrong!
they switched in like april of 92.
i think if a oil pan, bends inwards, its a 6 bolt, and according to your 3rd pic it goes inwards.
but it could be at a diiferent point than where the vfaq states.
when exactly was your car built, and is this the originial engine??
 
Looks like a 6-bolt to me.

If you have a 92, you're pretty much guaranteed to have a 6-bolt. Sure, they might have changed production in the middle of the year. However, don't forget that the next model year starts selling way before the year actually starts.

Those cars that were build in the middle of 1992 were probably sold as 1993's. I know my 93 was built in 92.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top