Aeromotive Boost Referenced FPR

[azkikr10]

I bought this fpr and didn't realize it was -10an fittings, and now i dont know where to get an install kit for it. Can anyone help walk me through what fittings i will need to install this? I went on sbr's website and furl injector clinic but they only talk about -6AN fittings. Thanks for your help guys. info can be found on the fpr here http://www.automotosports.com/dsm_fuel.asp

 

[Stoner]

Contact AMS about the fittings. If they sell the same one you have why not call them?

 

[azkikr10]

Just wanted to see if anyone on the board has done the same thing before i go bothering ams.

 

[sickgsx-316]

dont see why it would be a bother for them to help you give them more of your money, and if it seems like it is than you should take your money elsewhere.

 

[azkikr10]

Well i didnt buy the fpr off them, i got it from cassifieds so i didnt want to bother them about it. But i did email them to see if they can help me out. I will post back if they can not help me.

 

[steve]

What size fuel line are you going to run?

I'm sure Earl's or one of the other AN fitting companys has the right reducer to thread into that AFPR.

Steve

 

[DSM90AWD]

http://www.vfaq.com/mods/FPR.html

 

[azkikr10]

i dont need a monster fuel line. Im going to be running a 3065 down the road but for now im on my evo 16g. I just ned whatever line everyone else is using.

 

[kevingst]

The norm is -6an. Just go to www.summitracing.com Online store> plumbing> fittings & plugs and you'll be able to find what you need from there for the fittings and reducers.

 

[steve]

So is what you bought this regulator? http://216.242.145.16/products/product.phtml?p=11

for the regulator you'll need the cutoff AN-10 to AN-6 reducer http://216.242.145.16/products/product.phtml?p=74
a AN-10 plug http://216.242.145.16/products/product.phtml?p=79
and a cutoff AN-6 to hose barb for the return

You'll need the fuel rail outlet fitting, hose and hose fittings.
http://www.automotosports.com/diy_misc.asp

Steve

 

[azkikr10]

Cool guys thanks for your help. Do i need to buy these or can i just get some brass fittings or sumthin at home depot?

 

[kevingst]

Sure as long as they fit & seal. I remember seeing one of the vendor kits (can't remember which) but instead of the usual anodized an fittings they included brass fittings.

 

[BoostedTalonTS]

Cool guys thanks for your help. Do i need to buy these or can i just get some brass fittings or sumthin at home depot?

I'm not sure about local hardware stores... I don't think they carry any AN stuff but Royal Brass in San Jose can get everything that was mentioned earlier, and it will be all brass fittings with out all of the flashy blue/red anodized stuff.


EDIT:
Everything EXCEPT for the fuel rail to AN-06 adapter, as that is application specific.