The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Post a Question

cel

  1. shorty7308

    420A Sputters between 45-60

    I got a 2gnt Talon that had the infamous oil leak from the head gasket, so I replaced with a Fel-Pro along with having a full valve job done and checked and decked.Everything is now put back together in which I had a faulty injector that was constantly dumping fuel. No cylinder wash and...
  2. Tyler’s_DSM

    2G P1104 - BCS Question/Concern

    Okay so I’ve got a 98 Eclipse GS-T. Just got it back up and running with a fresh t25 turbo. I’ve had a p1104 issue prior to this new install. I’ve had old turbo apart for so long after rebuilding myself but forgot to mark to keep it balanced. Long story short easier just to get a new turbo...
  3. muselmann

    2G Euro GS Stalls/Shuts off when warm

    Heyo people I have a 99‘ GS (EUDM Model) with a 4G63 N/T and the car shuts off after getting some temp when not moving. I changed the camshaft sensor already, it did not fix the problem. There is also still a CEL coming on sometimes while driving. If I turn off the car while the light is on, I...
  4. patman

    2G Cel P0100 code - how to check MAF?

    Hi guys!I have a turbo 2G. After driving for ~3000 miles with no new mods or problems, my 2G started running super rich, and the car just dies, it has no idle. It is showing P0100 code referring to MAF circuit, I checked the cables, cleaned the MAF but it didn't fix the issue.I saw some...
  5. Seangoodie2

    2G P0622 code/ brake, battery and A/T temp light

    Looking for some help with my p0622 code and a/t temp, brake and battery light on dash. After driving for about 2 or 3 miles my a/t temp, brake, and battery light come on and will occasionally go off but stays on a majority of the time. Ive captured some data logs where it shows the voltage at...

  6. Ecm cel help

    ok so, knock now doesn’t seem to be a problem did multiple full boost/ full rpm range pulls and cel never even flashed. Now after I started my car this morning after Installing ECMLink last night the check engine light is on for a injector circuit malfunction on cylinder two. Could this be...
  7. HX_35Galant

    OBD2 not communicating with ECU can't use dsm link

    Howdy everyone, I got a 94 Galant gs that I bought from a well known dsm guy in Chicago but I'm having lots of troubles getting dsm link hooked up on it. Long story short I've been talking with the guy I bought it from to find out why the obd2 and ECU aren't communicating because I've trouble...
  8. sacrileger

    1G Code 43 EGR after 2g head drop on 1g 7bolt block

    I have dropped 2g head, including intake, on my 1g 7bolt block recently - '94 Talon, non-turbo, most likely w/ California Emissions ECU settings . I have also installed the 1g CAS, throttle body and EGR valve on the 2g head; among others. The timing of the engine should be 5 degrees BTDC +/- 2...
Boosted Fabrication
ECM Tuning
ExtremePSI
FIBA Motorsport
Fuel Injector Clinic
Innovation Products
Jacks Transmissions
JNZ Tuning
Kiggly Racing
Morrison Fabrications
Rix Racing
RockAuto
STM Tuned
Support Vendors who Support the DSM Community
Back
Top