88BB8B
Proven Member
- 179
- 19
- Oct 14, 2016
-
Coldstream,
BC, Canada
We've got injectors, we've got compressors and clutches! Okay maybe only one clutch.
Hey guys. I've accumulated a bunch 2g of parts I don't need. Most of them came with a car that I bought. Some of them only fit 2g, some are good for both 1g and 2g all of these parts were from or for an originally non turbo, now turbo 1995 2g DSM AWD.
So first up. A set of OEM 450cc DSM injectors. They worked when I pulled them out of my car, I didn't clean them or anything, but they werent an issue, I just upgraded my injectors. Asking $100 USD OBO + shipping
Next item is a lightly used clutch. The disk from this came out of my car when I upgraded my clutch, this disc only has a few dozen km on it. The pressure plate was installed in another on of my DSMs for about 10 minutes. I thought it was slipping so I took it out, but it was just because my driveshaft was off. Basically new, but used assembly asking $75 USD + shipping
I've got an AC condenser that wont fit with my new setup. A little dinged but nothing out of the ordinary. Asking $60 USD + shipping
I have 2 AC compressors. One of them appears to be a genuine mitsubishi compressor, the other one is a denso, they appear to have the same mounting hole locations, and since I got both with the car I have to assume they both fit, but cannot gaurantee the denso. They wont fit with my manifold. I have never ran either of these compressors, but I'm under the pretense that they work from the previous owner of my car. I'm asking $175 USD + shipping for either. The two compressors are seperated in the photos by 3 of a fuel rail.
Fuel rail: an oem 2g fuel rail for the 450cc injectors. nice and clean. Asking $60 USD + shipping
I have an OEM T25 O2 housing with the flapper still installed. I also have an oem diaphragm wastegate actuator, it appears to be brand new, but who knows. Asking $40 USD for the O2 housing, and $35 USD for the actuator + shipping.
I have a set of eagle H-beam rods for a 7 bolt, they have never been installed in an engine, however they need new bushings installed in the small ends. paid $600CAD. asking $300 USD + shipping.
Please note that I am in B.C Canada, so shipping costs and times will be from here.
Post note. I also have 3 OEM evo 8 pistons I probably don't need. However 2 of them are cracked on the side skirts (packaging error) so I'm not using them, if you feel that you want these, make an offer, I'll let all 3 go real cheap as I dont even want the 2. the OEM evo rods and pins are not included.
Hey guys. I've accumulated a bunch 2g of parts I don't need. Most of them came with a car that I bought. Some of them only fit 2g, some are good for both 1g and 2g all of these parts were from or for an originally non turbo, now turbo 1995 2g DSM AWD.
So first up. A set of OEM 450cc DSM injectors. They worked when I pulled them out of my car, I didn't clean them or anything, but they werent an issue, I just upgraded my injectors. Asking $100 USD OBO + shipping
Next item is a lightly used clutch. The disk from this came out of my car when I upgraded my clutch, this disc only has a few dozen km on it. The pressure plate was installed in another on of my DSMs for about 10 minutes. I thought it was slipping so I took it out, but it was just because my driveshaft was off. Basically new, but used assembly asking $75 USD + shipping
I've got an AC condenser that wont fit with my new setup. A little dinged but nothing out of the ordinary. Asking $60 USD + shipping
I have 2 AC compressors. One of them appears to be a genuine mitsubishi compressor, the other one is a denso, they appear to have the same mounting hole locations, and since I got both with the car I have to assume they both fit, but cannot gaurantee the denso. They wont fit with my manifold. I have never ran either of these compressors, but I'm under the pretense that they work from the previous owner of my car. I'm asking $175 USD + shipping for either. The two compressors are seperated in the photos by 3 of a fuel rail.
Fuel rail: an oem 2g fuel rail for the 450cc injectors. nice and clean. Asking $60 USD + shipping
I have an OEM T25 O2 housing with the flapper still installed. I also have an oem diaphragm wastegate actuator, it appears to be brand new, but who knows. Asking $40 USD for the O2 housing, and $35 USD for the actuator + shipping.
I have a set of eagle H-beam rods for a 7 bolt, they have never been installed in an engine, however they need new bushings installed in the small ends. paid $600CAD. asking $300 USD + shipping.
Please note that I am in B.C Canada, so shipping costs and times will be from here.
Post note. I also have 3 OEM evo 8 pistons I probably don't need. However 2 of them are cracked on the side skirts (packaging error) so I'm not using them, if you feel that you want these, make an offer, I'll let all 3 go real cheap as I dont even want the 2. the OEM evo rods and pins are not included.
