dacowgod
Supporting Vendor
- 451
- 280
- Feb 3, 2006
-
Morgantown,
West Virginia
Tons of DSM/EVO parts here - have 4 parts EVOs and several thousand square foot of DSM parts in storage..
There are literally several thousand other parts that are here that are not listed.. if you need something Stock or not feel free to ask...
All parts located in Morgantown WV
call or txt 304-813-2405 - Ricky
EVO 3 Intake Manifold - $200
MHI Big 16g - $425
Billet 16g - $475
Cleaned and flowtested ID 725 Hi-Z Injectors - $350
Cleaned and flowtested PTE 1000cc injectors - $255
Cleaned and flowtested FIC 850s - $200
Cleaned and flowtested PTE 550s - $125
Cleaned and flowtested FIC ASNU 1050cc injectors - $400
2g Skunk2 coilovers w/ Tokiko Blue struts - $450
Brand new 2g/evo Oliver Billet "Ultralight" Rods - $725
Used DNP Style exhaust manifold (DSM Flanged) - $50
Chinese 16g in good shape - $75
Kiggly 7 bolt flexplate - $100
2g black box ECU - $75
slightly Used Gates racing Kevlar belt - $50
Fuel lab "Prodigy" inline fuel pump - $300
BBK 62mm DSM Throttle body - $150
PTE 6766 - Freshly rebuilt 0 miles
.81 Open T4
3" Vband out
H Cover w/ 4" inlet and 3" outlet
Rebuilt by Justin Whitesell (Did not need a rebuilt just a courtesy before resell to be cleaned inspected and consumables replaced)
$875
Brand new HX40
Built by Justin Whitesell as well
6 blade 60mm Pro compressor
Large 76/67mm Turbine
BEP .70 AR T3 exhaust housing (Machined to accept the 76/67 Turbine)
T3
3" vband out
$875
Freshly built 2g 7 bolt short block(bottom end)
Eagle/Wiseco/ACL - 0 miles - $1800
1g SD Bundle w/ harnes Omni 4 bar and GM IAT - $100
Accufab 75mm Throttle body (Mustang flange) - $150
3g Lifters - $65
Genuine Greddy type "RS" Bov - $75
NGR Type S BOV (better than greddy type s) - $95
ARP 6 bolt head studs - $50
ARP 7 bolt head studs - $65
Walbro 255 pump (2g) - $40
Walbro 400 pump - $85
red Aeromotive AFPR w/ gauge - $125
red Fuellab AFPR w/ gauge - $125
ECMLink V3 Full 1g w/ 90 ECU - $575
Innovative LC1 wideband w/ gauge & Sensor - $125
Delta 272 Cams with shims - $300
63mm Non turbo Throttle body - $125
Competition Stage 3 clutch (Very low miles) $275
Competition Stage 3 clutch w/ 8 puck disc and CC Chromoly FLywheel - $400
Forge 1g style BOV - $60
4 bolt manual rear end w/ axles and cups - $400
red AEM Fuel rail w/ shims - $100
2g GST Transmission - no grinds - $350
There are literally several thousand other parts that are here that are not listed.. if you need something Stock or not feel free to ask...
All parts located in Morgantown WV
call or txt 304-813-2405 - Ricky
EVO 3 Intake Manifold - $200
MHI Big 16g - $425
Billet 16g - $475
Cleaned and flowtested ID 725 Hi-Z Injectors - $350
Cleaned and flowtested PTE 1000cc injectors - $255
Cleaned and flowtested FIC 850s - $200
Cleaned and flowtested PTE 550s - $125
Cleaned and flowtested FIC ASNU 1050cc injectors - $400
2g Skunk2 coilovers w/ Tokiko Blue struts - $450
Brand new 2g/evo Oliver Billet "Ultralight" Rods - $725
Used DNP Style exhaust manifold (DSM Flanged) - $50
Chinese 16g in good shape - $75
Kiggly 7 bolt flexplate - $100
2g black box ECU - $75
slightly Used Gates racing Kevlar belt - $50
Fuel lab "Prodigy" inline fuel pump - $300
BBK 62mm DSM Throttle body - $150
PTE 6766 - Freshly rebuilt 0 miles
.81 Open T4
3" Vband out
H Cover w/ 4" inlet and 3" outlet
Rebuilt by Justin Whitesell (Did not need a rebuilt just a courtesy before resell to be cleaned inspected and consumables replaced)
$875
Brand new HX40
Built by Justin Whitesell as well
6 blade 60mm Pro compressor
Large 76/67mm Turbine
BEP .70 AR T3 exhaust housing (Machined to accept the 76/67 Turbine)
T3
3" vband out
$875
Freshly built 2g 7 bolt short block(bottom end)
Eagle/Wiseco/ACL - 0 miles - $1800
1g SD Bundle w/ harnes Omni 4 bar and GM IAT - $100
Accufab 75mm Throttle body (Mustang flange) - $150
3g Lifters - $65
Genuine Greddy type "RS" Bov - $75
NGR Type S BOV (better than greddy type s) - $95
ARP 6 bolt head studs - $50
ARP 7 bolt head studs - $65
Walbro 255 pump (2g) - $40
Walbro 400 pump - $85
red Aeromotive AFPR w/ gauge - $125
red Fuellab AFPR w/ gauge - $125
ECMLink V3 Full 1g w/ 90 ECU - $575
Innovative LC1 wideband w/ gauge & Sensor - $125
Delta 272 Cams with shims - $300
63mm Non turbo Throttle body - $125
Competition Stage 3 clutch (Very low miles) $275
Competition Stage 3 clutch w/ 8 puck disc and CC Chromoly FLywheel - $400
Forge 1g style BOV - $60
4 bolt manual rear end w/ axles and cups - $400
red AEM Fuel rail w/ shims - $100
2g GST Transmission - no grinds - $350