Quick clutch question

[tylerdurden801]

I've got my trans dropped and removed the rounded flywheel bolt so I'm ready to start putting it back together. I didn't really pay close enough attention to the clutch as I was pulling it out so I'm not quite sure which way the clutch disc faces in relation to the pressure plate? TIA

 

[FourG63 97GST]

the thicker side goes towards/inside the pressure plate.
it should only fit one way anyway

 

[philipkrotch]

look and see if the clutch disk says anything. sometimes they are stamped "flywheel" meaning that side goes aginst the flywheel. if not then there is only 1 way it can really go.

 

[boostedinaz]

It will only fit one way.


Michael