Help for custom brake line with inverted flare ...

[DSM4LIFE-AWD]

Ok I need to do my brake line and I want to order some -3 brainded steel line with fitting ... I want to start at the master and go to the non-abs proportionnal valve. Than proportionnal valve to the front brake line (got some goodridge ss line for the caliper) ...

I need to know if the ports are inverted flare m10x1.0 in the master because I know it's m10x1.0 in the proportionnal valve.

I also read somewhere that there is inverted flare at 37 and 45 deg. Wich one do we have on our car ? I don't have the stock line anymore to check it myself.

Thanks guys

 

[DSM_PWR]

Off topic, but where are you ordering the -3an lines from?

Ive always wanted to convert to SS lines but never knew how to order custom length pieces or Do-It-Yourself ways

 

[DSM4LIFE-AWD]

Off topic, but where are you ordering the -3an lines from?

Ive always wanted to convert to SS lines but never knew how to order custom length pieces or Do-It-Yourself ways

You can order -3 ss line from Aeroquip for sure. I just give a call to TuboQuip and they just told me that a division name BrakeQuip can do my brake line and put inverted flare fitting on them (m10x1.0) ... Cost around 50$ for 44" of line with 2 fitting on them.

Hey DSM PWR I just quote them at FTP, Inc.-Stainless braided Dash 2 and Dash 3 Hydraulic brake Kits & Components and it's only 65$ for the 4 hoses with crimp inverted flare fitting on them (m10x1.0). Now I can start at the brake master to the prop valve than prop valve to the front wheel to connect my goodridge ss line ...

 

[DSM_PWR]

Hmm link doesnt work, are these cut ot fit?