For Sale 6 bolt short block $500.00

[george bromwell]

i have a 6 bolt out of my 92 tsi that has about 120k on the seasoned block, the engine was rebuilt 1200 miles ago but was displaying 4psi oil pressure, due to bent oil pan that was pushing into the sump. (as well as some dried rtv from the prev rebuild) i pulled the motor, purchased another from rix racing, so this one is ready for a rebuild. engine ran ok when coming out, no noises, but i pulled 2 rod caps and found bearings are in ok shape, but not for 1200 miles. ( i can send pics) there was never any metal in the oil pan, but i'd still rebuild it so you know its going to last you, no scoring on the cylinder walls and rings are new so you'd be okay if you wanted to skip those- but again you're already into the motor so why not. i'll give you the straightened oil pan as well, so short block from deck to pan. stock bore/stroke and i cant ship this thing, pick up only.
thanks for reading- i've since posted pics of the rod bearings to show the motor is worthy of a car.
edit:1/07/2021
so it's bored to 85.5mm and for those who i told it hasnt been bored out, i was wrong.
i was thinking that 85.5mm was stock bore and im pretty sure a few ppl thought i was trying to screw them . hopefully this helps.

240-529-8040 i do paypal but fees are on buyer. also, cash, zelle, cash app - George

edit 3/31/2021- new motors together, im just going to keep this block and rebuild it myself. cant hurt.

 

[george bromwell]

i have a 6 bolt out of my 92 tsi that has about 120k on the seasoned block, the engine was rebuilt 1200 miles ago but was displaying 4psi oil pressure, due to bent oil pan that was pushing into the sump. (as well as some dried rtv from the prev rebuild) i pulled the motor, purchased another from rix racing, so this one is ready for a rebuild. engine ran ok when coming out, no noises, but i pulled 2 rod caps and found bearings are in ok shape, but not for 1200 miles. ( i can send pics) there was never any metal in the oil pan, but i'd still rebuild it so you know its going to last you, no scoring on the cylinder walls and rings are new so you'd be okay if you wanted to skip those- but again you're already into the motor so why not. i'll give you the straightened oil pan as well, so short block from deck to pan. stock bore/stroke and i cant ship this thing, pick up only, and unless you're just a hairy man/woman beast that can carry and lift 200 pounds, i'll help you load it.
besides, if you come pick it up, i can show you my slightly trashed 92 panda, and we can gossip for 5 minutes on how nice it is to meet another good dsmer and kick some tires and junk. i also have 3 chickens so you might get to see them, as they are the guardians of all dsm parts that cant fit in my basement. thanks for reading, i love you.
240-529-8040 for pictures of the engines or bearings, for $5 extra i will include pictures of my chickens. i do paypal but fees are on buyer. - George

 

[george bromwell]

bump and price drop to $300.00 it would be nice to get rid of this short block.

 

[george bromwell]

apparently i don't have location up. frederick maryland,21702
thanks friends.

 

[george bromwell]

bump- and corrected description. it's bored to 85.5 mm- i said it wasn't, my bad wasnt thinking.

 

[george bromwell]

bmp