Hey, assembling 6 bolt motor, I have a used oem front case und strait cut gears. Gears look to be in good shape, just a little concerned about wear marks in front case from gears. I can catch my fingernail on it. Any thoughts ?You must be registered to see element.

Hello all,I’m in the midst of finally getting my block all assembled after getting the time place and money. There appears to be some hairline spiderweb cracks in my front case, and I’m not sure if they are from manufacturing or the previous owner torquing it to hell.Let me know if you would...

i'm doing a stock rebuild on my 420a and I figured I might as well replace the oil pump and water pump while i'm at it, does anyone have a good spare they'd be willing to sell me?

So I got around to eliminating the balance shafts on my rebuilt 4g. I have the stub shaft installed and the freeze plug in but on the stub shaft hole what threads into that to keep oil from coming out? There's an o ring that sits on top in the groove but they don't give you anything to thread...

You must be registered to see element.Here is a link to the noise in question.The car: 1995 Talon M/T with BSE and evo3 16g.The engine was just rebuilt, makes great oil pressure and has great compression. It didn't do this before the rebuild. Note that the P/S pump, Water Pump and...

Car runs fine under load, and even when you start it for the first 5 or so seconds when idle is high, When idle settles at around 850 you can really feel the engine vibrations and misfire. The Galant is running and driving but the vibration is extremely worrying, at stop and go traffic the idle...