The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support STM Tuned

cooling fans

  1. Mitsi1991

    1G No cooling fans when A/C button is engaged.

    So Im having a bit of a head scratcher on my 91 eclipse? Its happened randomly? First my defroster switch stopped working and ive tried a few new known working switches and they still dont work. Ive checked the fuses they are all good. And of course the only way I can keep my motor cool is so...
  2. 406_Talon

    2G AC fan will not come on with DSMLink "Turn Fans To Full" button

    So I swapped my crappy mishimoto fans out for a nice Derale pusher and a FAL puller. I put the puller on the radiator fan side and the pusher on the AC side, due to packaging constraints.Both fans are 2 wire, so the OEM 4 wire high and lo wires on harness side are tied together on both sides...
  3. SnowmanFD

    1G How big is the passenger side fan?

    My under hood temps are higher then id like atm and i want to lower them before we summer and it becomes an issue. I currently have only the passenger oem fan and a full ac delete, i have a fp manifold and heat shield on the way so hopefully that will help but i also want to install a second...
  4. 96spyderdrag

    2G Help wiring Mishimoto fan

    I can't seem to figure this out, installed mishimoto fans and Shroud but they won't turn on. I see the pig tail from the fans are 2 Blue and 2 black, the car pigtails are 1 Blue, 1 Blue &white and 2 black. How should I wire this to keep the car pigtails? Shroud photo attached
  5. 93eclipse113

    1G Cooling Fans

    So i have recently bought my first DSM, a 1993 Gs that was 6 bolt swapped. Currently the fans are wired to a fuse then to the battery and i have to connect two wires before i take it out to drive and disconnect them when i leave the car. How can i get them to run by themselves?
  6. Kai Hefner

    2G Wiring both fans to run together

    To preface this question, I will likely be deleting my AC soon. Blah blah comfortable driving whatever; I'll drive fast and roll the windows down.For clearance issues with a new radiator, I was looking to keep one fan pulling, and one fan pushing. Are there any problems with wiring these two...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top