The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

New Best For The DD 1G AWD

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

diambo4life

20+ Year Contributor
1,839
804
Apr 18, 2002
Edmond, Oklahoma
[email protected]


Main Mods:
2.0L 6-bolt w/ Wisecos & Pauters
Stock unported head
BC springs/retainers
BC 280s
DSM link V2
MAFT blow through/3 inch MAS
Old school DT FMIC w/2.5" IC pipes
Full 3" exhaust w/Magnaflow muffler
GT35r, Boost>30psi+
4 1600cc injectors
Pump E85 fuel
Stock fuel rail, stock FPR, stock fuel filter
Twin fuel pumps (Bosch 044, Walbro 392 - inline setup) Stock feed (b4 filter), stock fuel return
Stock intake manifold & stock T/B (no port or extrude hone)
ACT 2600PP w/ solid 6-puck
Stock tranny & transfer-case, 4 bolt rear swap
Street tires: Bald GY Eagle F1s 215/45/17

Car weight with me in it = ~3150LBS

My friend forgot his vidcam so no vids. :cry: I do have a couple in the vid section though.
My best 1/4 trap speed on this setup is [email protected] from a couple weeks ago. ;)
 
Congrats! Haulin some heavy 3150 lb. ass!!!
 
Stock tranny? You're probably one of 2 or 3 guys running 10s on a stock tranny, congrats!

I'm pretty sure more than 2 or 3 guys run 10's on a stock trans. As long as it's not a 7 bolt trans with the weak 3-4 slider it will ok with no wheel hop and a competent driver. My other, other 11 second car broke a thin 3-4 slider on a brand new trans after a month of street driving with only a CFDF clutch.
 
And What Power Are You Making???

If you look on his registry he posted:| it says he made 541whp at 31psi. It doesn't say if it was dynojet? It also said he ran 12.0 at 128mph on these numbers.
Not sure if he dynoed again because his traps are much higher now?
 
YEA THATS WHY I ASKED LOL

AND A QUISTION FOR YOU HAVE YOU HEARD ANY GOOD THINGS ABOUT THE HTA 35R??

The Strictly Modified Talon(Devin) went high 9s on the HTA35r after going high 10s on the b16g.
Not sure about his engine internals or anything like that and the car could have quite a bit of weight reduction?
It really depends on your goals, its definitely capable of some pretty big power!
YouTube - 9.90 35R 2G DSM Strictly Modified Racing

I've never really looked into it too much though, because its way too much for my current power level i desire
 
The Strictly Modified Talon(Devin) went high 9s on the HTA35r after going high 10s on the b16g.
Not sure about his engine internals or anything like that and the car could have quite a bit of weight reduction?
It really depends on your goals, its definitely capable of some pretty big power!
YouTube - 9.90 35R 2G DSM Strictly Modified Racing

I've never really looked into it too much though, because its way too much for my current power level i desire

HOW MUCH YOU AIMIG FOR.????I HAVE THE 20G BUT EVERY PART I BUT FOR MY CAR I JUST HAVE TO URGE TO UP MY GOALS AND GET A BIGGER TURBO ...I HAVE MY EYES ON THE FOLLOWING ......HX40 WITH BEP ,PTE 6765 WITH BILLIT WHEEL,SOME SORT OF 35R
 
I HAVE THE 20G BUT EVERY PART I BUT FOR MY CAR I JUST HAVE TO URGE TO UP MY GOALS AND GET A BIGGER TURBO ...I HAVE MY EYES ON THE FOLLOWING ......HX40 WITH BEP ,PTE 6765 WITH BILLIT WHEEL,SOME SORT OF 35R

The 20g is plenty capable of 11sec slips. I honestly wouldn't upgrade until you get there. It also has good spoolup and street characterics despite what they said many years back.
 
Car has only been on the dyno once on this setup. Wasn't really tuning it, but just for curiosity purposes. Tune was very conservative since I had just switched to E85 a few days earlier. It made 527whp, 538whp and 541whp right at 30-31psi. Two days later it ran 12.0@128mph. Dyno is a Superflow inertia dyno.

My turbo is a regular PTE GT35R. Thanks Hi-Rev Performance for the hookup. Not a HTA.

I'm running Brian Crower spring/retainers. It's in the mod list. :thumb:

...and the tranny is a bone stock unit from a 1992 AWD....open diffs and all.
 
Mod list in detail and more pix of the car can be found by clicking the link below. Only thing that I have recently added to the car that is not listed is the inline pump. Otherwise the list is complete. Thanks. :thumb:

The DSM Registry Ver2

I meant you new ET ;-) I saw on the link forums you were throwing that in but I haven't checked your updates on it, I'll go do that now ha
 
Congrats! Your setup is awesome, good luck taking those numbers even farther!
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest posts

Build Thread Updates

Latest Classifieds

Back
Top