Vac. Lines.

[smsrider44]

Ok, have a couple questions on my vac. lines...I have a vac line from the end of my fuel rail and I forgot where it goes. As seen here.

You must be logged in to view this image or video.

Also, when I was taking my turbo off I noticed a nipple right by the transmission and engine on the passenger side but I would like to know what was hooked up to it at one point.

You must be logged in to view this image or video.

Thanks in advance.

 

[DSM nOOb]

vaccum line goes to the intake manifold. that nipple is your clutch slave cylinder bleeder

 

[smsrider44]

Like the the nipple on the middle of the intake? I see a big on there and I think that's what it goes to...Thanks for the help!

 

[DSM AWD TSI]

It goes to your intake manifold, not intake (it needs vacuum to open at idle).

 

[smsrider44]

Ok, The middle of the intake manifold that says ECI Multi correct? Just want to be 100% sure.

 

[95fwdtsi18psi]

Ok, The middle of the intake manifold that says ECI Multi correct? Just want to be 100% sure.

Be careful, there's a nipple on the intake near the middle that is for your BOV. Don't mistake those.

Also I can't tell, but one of the lines from the rail got to the FPR...