The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support ExtremePSI

timing belt cover

  1. Dihtung Glava

    2G Timing belt cover

    Hi everyone, so if you checked my profile you'll know I have the engine opened and stuff and one of the things that came of in the dissasembly was the timing belt cover. There was only half of it to begin with and it's all cut and melted from the belt rubbing on it so I need a new one. Problem...
  2. sacrileger

    1G What is the structural difference b/w MD141454 and MD141456/61 timing belt covers?

    i have a "second hand" 6-bolt 4g63 engine which came with a timing belt cover stamped with part number MD141459 S / MD141461 B.this particular timing belt cover leaves about 1/2" gap between the oil pan flange and the bottom end of the cover. the timing belt can be clearly seen thru the gap...
  3. sacrileger

    1G New timing belt disintegrating after fewer than 18000 km - WHY?

    After installing a brand new timing belt and putting on about 18000km, i noticed the timing belt started making rhythmic 'swooshing' sounds as if the belt was flapping and rubbing against 'something' so i took the timing belt cover off to examine the belt and instantly noticed irregular shallow...
  4. Timing Belt Cover 4G63T
    Sold

    For sale Timing Belt Cover 4G63T

    $30.00
  5. Junzu

    2G Timing belt cover recommendations?

    Anyone have a website or recommendations on where to get a a full timing belt cover set? I have no cover at all and the lower, middle and upper parts on extremepsi would be $200+ combined. Don't like to cheap out on this car but feel like I can definitely get it for cheaper.
  6. cmp1516

    Timing belt cover rattling (Middle section?)

    Hey guys first post here, I recently got my Galant tuned up (replaced all belts including T-belt, spark plugs, rear engine mount). Now I got a new problem, a knocking noise coming from the middle section of the timing belt cover. It doesn't go away when revving nor when it goes up to operating...
  7. Sandica

    Removing Just Crank Pulley and Timing Cover, is TDC Necessary?

    Hey Guys,So I did something stupid yesterday. I was cleaning up my engine compartment and think I might have accidentally dropped a Q-Tip down behind the timing cover (I know, I know). The middle portion of the timing cover was cut out by the previous owner so there is an opening near the...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top