The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

high oil pressure

  1. jesse12345

    Resolved 2G Really high oil pressure

    I just swapped my oil filter housing last night with a different one I bought. I only swapped because I used silicone and instead of a razor blade I used a scotch pad on my air tool. I'm not proud of it so it all got replaced with a new gasket and no silicone and an oem unit all torqued. I...
  2. Casem13

    2G Possible spun bearing?

    I recently had issues with crankwalk. I checked and the main middle bearing with the thrust washer was shaved down on one side. The crankshaft has mild scratching on the side that wore down the bearing. I replaced the Main bearings and the crank position sensor because it was bad due to the...
  3. jesse12345

    420A High oil pressure blowing filters

    Okay so I just got my engine put in about a week ago and finally wired everything up car started it runs great but my problem is oil pressure cold at idle was 60 to 70 and when I'd Rev it up it go well past 100 and my first oil filter I had was a small 348 the gasket blew out of so I put a 085...
  4. polverari

    2G Very High Oil Pressure After Rebuild

    Hello friends, I'm here for another question. As I always start my posts: Once again I apologize for any language errors.I used the forum search, but despite finding some topics related to high oil pressure, I couldn't find an answer to my problemI just rebuild my car engine (2G GST 2.3...
  5. Eagle4g63t

    2G 95 eagle talon. Need help pls

    Just bought a 95 eagle talon tsi awd (4g63t) and it has a problem with the oil pressure on stock gauge. It will climb to the top cold and when it’s warm it will drop to the middle of the gauge. But when I drive it while it’s warm it will climb back up again. I changed the oil to 10w30 and...
Support Vendors who Support the DSM Community
Back
Top