I'm going to go ahead and post that since it took me a few minutes to find a good copy of it. It's just the same configuration as it would be to an external wastegate except that it's reversed as far as what goes to the "upper" and "lower" ports...

Yes that picture can be found in the link software. Turbo smart actually has the best diagrams for all different setups if you wanted to see how a dual port internal wastegate is plumbed

Vacuum fitting thread pitch is M6x1.0(On the wastegate) The 1 port and 2 port is the same wastegate just they installed the vacuum nipple and charge like $50 more. I have it hooked like thisThis configuration allows you to run about 1.8-2x...

Has 2 ports, but comes with the lower port blocked off with a bolt.

UPDATE ON TURBOTurbo is actually good. I messed up the wastegate preload when I had to reclock the turbo to properly fit.

Update on the Taiwan 60-1 turboEdit 07/22/24 will reinstall turbo and increase wastegate spring preload.Got everything installed and it refuses to boost past 17psi. Even went as far as removing the boost source to the wastegate, still only...

Ebay aluminum radiator. Going to rub ebay fan on bumper passenger side of radiator and use AC fan as my main fan.

Today got the Boosted Fabrication Crossmember on! Gives so much more space to work and gets rid of the huge engine mount.

Probably. If its on their website you should be able to get it. When they contacted me they said they would be closed from July 15th to the 29th.

Are they still offering kits? Prices seem extremely good!

Is there a reason as to why i can no longer edit my post on here? Was hoping to get things updated

No experience with that brand but hopefully it works out :thumb:

Taiwan but yes

Journal bearing version

Big 16g vs 60-1 td06

I wouldn’t go that far. Plenty of us have run Dsmlink in pretty high powered cars. It does have a limited number of programmable ins and outs, but it does have them. Dsmlink is less than 1/3 the cost of most aftermarket ecu’s. It isn’t 1/3 as...

This weekend plan is to install budget BBK.Calipers - 3312255156367493, 3312255156367483 Caliper crossover line - BM42-CT (Only need if your calipers did not come with) Caliper bolts - M12-1.75 x 35mm and M12 lock washers Rotors - BENDIX...

The fact that you don’t need to make or have made a harness seems to be one of their best selling points.

Its plug and play and extremely simple and easy to use. I didnt link DSMlink software at all.

Place Holder