14b tapping

[selmerguy]

Has anyone tapped the 14b oil feed to 3/8np?. I was so tired of the stock banjo bolt leaking I decided to run my own 4an braided feed line. I took the turbo out and tapped it to 3/8npt. I was very careful to clean out the turbo and it seems to work well. Just curious if anyone else had tapped the turbo or not.

 

[95blackGsTurbo]

If the turbo is leaking then get new crush washer or a feedline and new banjo bolt.

 

[selmerguy]

If the turbo is leaking then get new crush washer or a feedline and new banjo bolt.

I put new washers on a new bolt and another fitting on there and still leaked. Tapping seems to work very well though. No problems yet.