Fuel Pressure wont stabilize

[jay1892]

I had my car idling and it shut down for no reason. Now it wont start. Don't have a rewire kit for my Walbro. I turn the ignition on and the fuel pump wont turn on. I go into Link and I can turn it on. Is it possible to not have enough juice for the pump?
Or does any one have any good places to start

 

[gofer]

Turning the key to ON in the ignition will never kick on the fuel pump but, as you mentioned, you can turn it on in Link and you get fuel pressure (43.5psi) then your fuel pump is working. So, basically, that's not your problem for the no start...

Diagnose it using this ---> 2G : How To Diagnose A No-Start

 

[mattp_65]

I would double check TDC on the timing belt. Put #1 Cyl TDC and see if all the timing marks line up.