Thermostat Housing Gasket [Merged 4-8] gooseneck

[GSXlaunch]

Anyone know of the part number for the t-housing gasket?? I just called and asked the local dealership and she told me there is no gasket there. I am talking about the gasket between the t-housing and the head...not the t-stat gasket. I have a 90 GSX....any help would be appreciated?

 

[GSXlaunch]

Never mind...got it...MD145038

 

[honduraneclipse]

you could always just go to lappens and they sell you the universal do it yourself water gasket ... its 99 cents

 

[dmxsoulja3]

1G 6 bolt motor, I'm putting it back together...and there is a gasket that mounts the thermostat housing to the head, no part store has it, assuming its a mitsu only part..can someone give me the name of it, or part number...

Thanks, Josh

 

[bignbumpin]

What youre looking for is the Thermostat housing gasket.
Mitsu part # MD118040 according to CAPS. Hope this helps!

 

[CyberEye]

For my 96 talon tsi, do I need the thermostat with the gasket? or the one with the rubber seal?

 

[CanadianTSi]

Rubber seal.

 

[CyberEye]

Rubber seal.

crap, it's the more expensive one . Allright.

 

[92Lazer]

'90 Laser 2.0 N/A

Need the OE part number for the lower thermostat housing gasket. (from the head to the housing)

 

[CompuBob_TSi]

Felpro FLP 35336

acdelco 12G26

these are my part numbers, I work at a parts store, but I hope they help you out.

 

[19Eclipse90]

Mitsu Part No. is MD145038

 

[Pursuit]

'90 Laser 2.0 N/A

Need the OE part number for the lower thermostat housing gasket. (from the head to the housing)

Hey you can use gray silicone with out gasket.

 

[BoostinGSX17]

i know this is 6years old but do you know what it would be for a 2g

 

[Defiant]

For a 2G, Permatex Ultra Grey.

 

[98gsxtuner]

I searched and couldn't find anything. I took my water neck and and tstat housing off to clean things up a bit and i noticed the gasket on the water neck was well falling apart so i cleaned the surface off, now my question is where to I find a gasket or what can i use to insure that it will not leak.


I also have another question and didn't wan't to start another thread hope this is OK MODS. I unbolted my down pipe from my o2 housing and the gasket there just fell apart in my hands any ideas where I can purchase one of them from? O ya any ideas on what i can do to keep the nuts that bolt the o2 housing to the down pipe from loosening???

Thanks in advance everyone.

 

[SrKegler]

Any parts store will sell you gaskets.

 

[fwdmaster]

You can find your gaskets on extremepsi or at your local mitsu dealer,also the local auto parts store will have it, and for your o2 housing bolts being loose, get some lock washers from home depot,they work really well

 

[98gsxtuner]

Is it just a little o ring gasket for the waterneck and I went to my local napa awhile back and they didn't carry the gasket from the o2 housing to the downpipe.

Anyone else have any input on this like if I could use an RTV just to get a better seal on the waterneck.

 

[420a-t]

You could, but the best thing to do would be to buy a gasket that's made for it. As for your exhaust gasket, you can buy one from extremepsi.com or ebay.

 

[98gsxtuner]

You could, but the best thing to do would be to buy a gasket that's made for it. As for your exhaust gasket, you can buy one from extremepsi.com or ebay.

Can i get the waterneck gasket from a local autoparts store ### I'm hoping to get my car back together tmrw.

 

[spydermanX98X]

i prefer Mr. Gasket "the right stuff" which is literally gasket material in a can.

 

[99gst_racer]

Use RTV on the water neck. Silver, black, red - it all works there.

Here's your downpipe gasket: EXTREME PSI : Your #1 Source for In Stock Performance Parts - 2-Bolt High Temerpature Exhaust Gaskets

You probably need a 2.5", but you should measure to verify before ordering.

 

[dsmkid973]

go onto lock tights website and get there gasket maker shit is amazing its a red gewy liq kinda