An Fuel Rail Adapter

[Icyu11725]

Im trying to run a steel braided line from the right side (drivers side) of my fuel rail to my FPR. I ordered a AN 6- Adapter off ebay for like $20 but when i got it in the mail today it fit perfectly into the fuel rail, but the holes to bolt it to the fuel rail dont line up right. The holes on the adpater are shorter then the hole on the fuel rail as u can see from the photo i uploaded. What shoud i do?

You must be logged in to view this image or video.

 

[ramsack]

Order the correct fitting.

 

[TSiAWD666]

STM has one that's engineered correctly. Good luck getting your money on that part.

 

[Icyu11725]

do you have a link for the stm one?

 

[92AWDHX40]

go to the diy page or even call them brian or justin can help.

 

[Gamble97]

Can you measure that fitting end to end? I have 2 of these sitting here but not sure what rail they fit.

 

[Icyu11725]

just called them, there all out of the longer an adapters. Any other places that sell them?

 

[agentorange313]

Im trying to run a steel braided line from the right side (drivers side) of my fuel rail to my FPR. I ordered a AN 6- Adapter off ebay for like $20 but when i got it in the mail today it fit perfectly into the fuel rail, but the holes to bolt it to the fuel rail dont line up right. The holes on the adpater are shorter then the hole on the fuel rail as u can see from the photo i uploaded. What shoud i do?

You must be logged in to view this image or video.

Can you measure that fitting end to end? I have 2 of these sitting here but not sure what rail they fit.

From my understanding it is the 1g dsms that use a "longer" style fuel rail AN adapeter.

It looks like you have a 1g fuel rail? Is that true, since you have a 2g listed on your profile?

I have included a picture of the 1g fiel rail adapter, note they are two different sizes. 2g will use two of the 1g inlet fitting for both sides

just called them, there all out of the longer an adapters. Any other places that sell them?

extremepsi carries them:

EXTREME PSI : Your #1 Source for In Stock Performance Parts