HEAD GASKET! What if my cylinders are bored wider?

[xharlequinx]

I have a 1991 mighty max that has a 4g64 sohc 8 valve. I need to know where I can get a head gasket that can fit my head considering that I had the block honed .5mm so that the 1g pistons could fit. The measurement for the cylinders is 87mm now. Can anyone help me?

 

[Cs4g63]

I thought for sure that the 4g64 had larger pistons than the 4g63. So im not sure how you are putting 1g pistons in a 4g64. Not to mention that the height of the piston, distance from the wrist pin to the top of the piston, is diferent.

 

[xharlequinx]

Woops. I meant the pistons I ordered were from the 4g64 block with the 4g63 head swap, even tho I"m keeping my stock head. The pistons are 87mm and I needed to hone my block .5mm to get it there. So n e way I need to find a 87mm head gasket.