The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Resolved I need some help finding 1G mistubishi part numbers.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

MidShipCivic

15+ Year Contributor
718
9
Apr 22, 2005
Orlando, Florida
I own an eagle talon and the mitsubishi parts guy tells me go the an eagle dealer. So I say ''92 eclipse GSX'' Then he says I need VIN. I have a 6 bolt engine 4 rear oem Talon.

1. Front cover crank seal.

2. Front cover oil pump seal ( black & round similar to above but smaller.)

3. 14b compressor O ring

4. OEM 14b turbo gasket manifold to inlet flange.

5. EGR gasket.
 
Solution
Well I have nothing better to do so here is what CAPS gave me.

14b compressor o-ring = MD613776 (I had to find this in the forums. Couldn't find it in CAPS)

Front case crank seal : MD095355 and MD365697

Oil pump shaft seal : MD069949 and MD343563

14b manifold to housing gasket : MD128901

EGR Valve gasket : MD088604 and MD119127


The parts that have two part numbers on them could be new and old numbers but CAPS shows both numbers for a part so write them all down and ask the parts desk what the correct number is.
Well I have nothing better to do so here is what CAPS gave me.

14b compressor o-ring = MD613776 (I had to find this in the forums. Couldn't find it in CAPS)

Front case crank seal : MD095355 and MD365697

Oil pump shaft seal : MD069949 and MD343563

14b manifold to housing gasket : MD128901

EGR Valve gasket : MD088604 and MD119127


The parts that have two part numbers on them could be new and old numbers but CAPS shows both numbers for a part so write them all down and ask the parts desk what the correct number is.
 
Solution
Haha, yep I was getting some parts yestarday for my talon and like 3 parts all had the same p/n and were all different! I was just thinking how much the parts guys hate Mitsu
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top