Palm iiic datalogger

[highvan]

My datalogger just came in a few days ago with all the software and cables that i need. I tested it out and worked great, but i have no idea what each thing is that it's showing me numbers for Or whats numbers are good or bad? Any help would be great.

 

[eclipse_20g]

Do you know how to post a log onto here so we can look at it? It would be a lot easier to show you if you did. Let me go steal somebody else's log real quick.

 

[eclipse_20g]

Go to this link, and take a look at the attached 2 logs. You should be able to match up the like numbers from your log and his and see what information you are getting. If you want help with the log, you'll need to post it up.
http://www.dsmtuners.com/forums/showthread.php?t=231115

 

[highvan]

I'm not sure how to get it off my logger onto my computer

 

[highvan]

Also, ever since i hooked up my the wire to plug it in, the ABS light stays on, is that normal? Can you also change settings on the car with a logger? Sorry, i'm very new to this

 

[highvan]

 

[steve]

Also, ever since i hooked up my the wire to plug it in, the ABS light stays on, is that normal?
Can you also change settings on the car with a logger?

Yes, the datalogger also puts the ABS computer into diagnostic mode. The works around is to clip the wire to the ABS computer and put a switch in it is case you ever need to scan it.

There are no setting that you can change on a stock ECU. You can turn on and off the solenoids and injectors to testing but that's it.

Read these two links for what the logger is telling you.
http://www.technomotive.com/prod/datalog/datalogger.htm
http://www.hywell.org/plhelp/

Steve