Are 1g and 2g Trannies Interchangeable?

[DSMAddict]

If say I buy a JDM 6bolt with tranny(AWD 5spd of course) Will it mount up correctly on my 2g GSX 5spd?

 

[candela]

the tranny will not... You can use the stock one though

 

[Tevenor]

Originally posted by DSMAddict
If say I buy a JDM 6bolt with tranny(AWD 5spd of course) Will it mount up correctly on my 2g GSX 5spd?

It will not 'bolt up' to the existing mounting holes/mounts. You will need to adjust the tranny mount, figure out a way to realign front roll stop to line up with the subrame brace (its off by about 6 inches in one dimension and 3 in the other), and you will need to figure out the rear mount. The only good thing is that the timing belt side engine mount bolts right up.

The best and easiest thing would be to use your stock tranny. In a 2G 3 of the 4 engine mounts are on the tranny, hence it wouldn't matter where the mount bosses are on the 6-bolt block.

 

[DSMAddict]

okay but will the clutch be interchangeable?

 

[L2RTSiAWD]

The clutch will but not the flywheel.

EDIT: Nevermind about the flywheel I just read your getting a 6-bolt block and tranny.