Fuel rail fitment

[Todd95TSi]

I think I read in a previous post that a 1g fuel rail can be used in a 2g to simplify the installation of a fpr. I now cannot find the post but am still interested in this because I can pick up a 1g rail with a 06an adapter welded in it for $50.

Is this easily done? What (if any) modifications would be necessary to do this swap?

 

[FearceDSM]

It says that you can get a 1g fuel rail, so I am just making a suggestion since you have not commited to that route yet.
What you would spend on that setup, you could get a get 2g direct bolt on for a few dollars more from fullthrottlespeed.com Mike Licht was prompt about replying and I had my part in less than one business week. I should mention that this was during the holidays and it still got here as promised. I cannot say anything good or bad about other vendors, but full throttle is who i dealt with and they were very prompt You can turn the pressure up or down and best part is that it is a direct bolt on to the 2g fuel rail with no modifications to the fuel rail.
Actually, upon further consideration, you will spend more going with the 1g fuel rail route.

 

[Todd95TSi]

fullthrottle.com looks like a software company.
"Pipeline Software The Windows Embedded and Bluetooth specialists "
or so the site says...

 

[FearceDSM]

Mah bad. fullthrottlespeed.com

 

[Mike 99GSX]

A 1g fuel rail is physically shorter than the 2g but everything else is the same and its a direct swap. It makes the 90 degree turn near the timing belt cover easier to deal with if you're plumbing something yourself.

 

[FearceDSM]

I was just offering a simpler solution, but you are absolutely right about the 1g rail. I figured I could help save him a few dollars, but then again I should have checked to see what he was looking to accomplish with the car before I made any suggestions. Either way, my suggestion stands if it fits his criteria.

 

[98TsiAWD]

1g rail with a 6AN adapter on one end or both? If both $50 is not bad, but if one side dont buy it.
Numerous places sell bolt on 6AN adapters for the fuel rails for $20 a piece.