big 24 greddy front mount with 16g on 2g doi need extra parts?

[GstRacer]

ok i ave a 2g with a 16g and i wanted to knw is there any other parts that i need to make the big 24 greddy front mount work or is evrything in the box to bolt right on i also have uicp and licp thanks

 

[L2RTSiAWD]

Since the greddy goes to the stock IC pipe location. you will still need a J-pipe for the 16G to connect to the IC piping.

 

[GstRacer]

where caniget that from and will i need it if i hvae the dejon tool lower ic pipes

 

[L2RTSiAWD]

Any IC pipes you have will be replaced by the greddy.

You can get a 2g 16g install kit from any number of dsm vendors.

You don't have the 16g on yet right?

 

[Devicex]

You don't have the 16g on yet right?

If you've got that 16g installed already then you have a J pipe and should not need to purchace anything else for the install.

 

[Spyke169]

While the greddy intercooler is nice, personaly I would get a custom intercooler made with a spearco 2-209. You can get on from road race for $290 (http://www.roadraceengineering.com/intercoolers.htm) and then just get piping bent. You won't have to have that pipe going accross the top of the intercooler back to the stock location (some people over heat because of poor air flow to their radiators) The 2-209 will also leave some room for upgrading to a bigger turbo in the future if you choose to go that rought.

 

[Spyke169]

While the greddy intercooler is nice, personaly I would get a custom intercooler made with a spearco 2-209. You can get on from road race for $290 (http://www.roadraceengineering.com/intercoolers.htm) and then just get piping bent. You won't have to have that pipe going accross the top of the intercooler back to the stock location (some people over heat because of poor air flow to their radiators) The 2-209 will also leave some room for upgrading to a bigger turbo in the future if you choose to go that rought.

 

[Devicex]

The specs on the 2-209 on RRE's sight make that core signifigantly smaller than the big Greddy, doubtful that it would be a better option, especially for the larger turbos.