On my coil overs which are megans there is no spot on the rear strut for the stock support that goes where the two lines meet. Al ot of threads on here have people saying to just zip tie them onto the strut but i was looking for a cleaner more permanent solution
my first step was to use a small drill bit then a combo drill/tap bit in m8x1.25 thread and located a spot where the lines would be secure and still have enough flex so they weren't stressed. i drilled and bolted them on
now the lines are permanently secured and out of the way. plus i dont have to worry about zip ties anytime i need to move something around or want to work on the brakes.
my first step was to use a small drill bit then a combo drill/tap bit in m8x1.25 thread and located a spot where the lines would be secure and still have enough flex so they weren't stressed. i drilled and bolted them on
You must be logged in to view this image or video.
You must be logged in to view this image or video.
now the lines are permanently secured and out of the way. plus i dont have to worry about zip ties anytime i need to move something around or want to work on the brakes.
Attachments
You must be registered for see attachments list
