Turbo Timer disarming your alarm?

[elfili]

I have an HKS TT with a 2G harness, and I noticed that after it shuts down the car, the doors unlock and disarms the alarm. (Viper 600). Does anyone else have this problem or a fix for it?
Any leads will help. Thanks in advance.

 

[HyperGSX]

I have my alarm set up so that after the turbo timer shuts off the car, the alarm automatically activates.

 

[RedTurboEclipse]

is the wiring hard to do that HyperGSX? i dont have mine hooked up with the harness.. its all straight wiring no 2g harness. so if its not too difficult to set it up so the alarm will activate after the TT.. im thinking of hooking it up properly..

 

[Tranman]

Actually, if you want to do it the "correct" way, use the following link:
http://www.lightningmotorsports.com/techmwa.htm

It's a GReddy TT, but it doesn't make a difference..same thing. Anybody in basic electronics wiring can do this.

 

[HyperGSX]

I didn't do the wiring myself, i can't stand electrical work The guy who did my alarm did it fairly easily and had no problems, i can ask him how he did if you want.

 

[RedTurboEclipse]

cool.. thanks for the link..

 

[RamenPride]

Originally posted by Tranman
Actually, if you want to do it the "correct" way, use the following link:
http://www.lightningmotorsports.com/techmwa.htm

It's a GReddy TT, but it doesn't make a difference..same thing. Anybody in basic electronics wiring can do this.

A much easier way is to hook up the +12V wire for the alarm to one of the accessory wires (blue, blue w/white stripe). When you turn the key off, there is no power going through these wires and the alarm will arm and stay armed when the timer finishes counting down and cuts off.

 

[Patryk]

i dont have a TT but my alarm actives by itself if no one does it withing 90 sec.

 

[elfili]

Thanks... seems like i got a couple of options.