vaccum lines for turbo install...

[Mitseclipse101]

can i use the vaccum line that goes from the intake manifold to the valve cover for vaccum lines for the turbo, if not what other vaccum lines can i tap into?

 

[SilverEclipseT]

You cant use that one. The vacuum lines that you can tap into are located in the back of the intake manifold. You can use those for your boost gauge, BOV, and fuel regulator.

 

[Mitseclipse101]

also wondering if i can use the one comming off the top of the throttle body, thanks

 

[shaneyeend]

why not just use the three located on the back of the manifold? there easy to find. if your really wanting ones thats out in the open, use the vacum attached to the EGR. that one will serfice, and it is one of the three that attach to the manifold in the back. EGR is the black round thing comming off the left front corner of the engine, near the valve cover, (from drivers seat).

 

[Mitseclipse101]

thanks for the reply, but i already hooked all the vaccum lines up to the throttle body vaccum at the top, and i was wondering if this was going to work, i am not able to start the car right now, because i am still missing a few parts, so if it isn't i will have to redo the vavvum lines, thanks

 

[Eclipsemblue]

i used the one off the throttle body for my boost gauge

http://www.dsmtuners.com/forums/attachment.php?attachmentid=39256&stc=1

pretty ghetto setup i know