i have a 99 eclipse and I’m wondering what head gasket to run on it🤔looks clean🔥🔥😂

Recently I had to pull my head because of leaking valve stem seals causing me to burn oil and since I’m running a fully exposed timing belt I was wondering if it’s at all possible to have a non interference set up If I use a thick enough head gasket and how thick do I need to go.The oem cams...

My Eclipse GSX build was finally completed and on the 1st start up oil was coming out of the turbo so we turned off the car and oil and coolant were mixed. Nothing is mixed in the top half of the engine, only once it passed through the turbo was it mixed. I sent the turbo back to forced...

So I just bought a gst eclipse for $1500 guy didn’t know what was wrong with it I go to drain the oil and coolant rushes out with oil but it wasn’t milky it seemed it was separated like the oil sitting on top of the coolant but I was wonder since it wasn’t milky yet but obviously the head gasket...

All,13 yr owner, and on my last leg of sanity. Getting to be more diagnosing and fixing than driving/upgrading the last couple years.Scenario - Just built the bottom end almost exactly one year ago. All manley forged parts. After a few hiccups after putting it all back together has been...

Deck of block looks really good, but it seems a small layer of the (stock) gasket metal has adhered to certain parts causing raised areas which won't play well with my cometic. Have been using plastic scraper denatured alcohol and elbow grease. I don't want to use anything with any abrasive in...

I'll start with the question: The leak is small and isolated to Cyl 1, since it is at the end of the motor is it worth trying to tighten the head on that side of the motor? Ive never opened up my motor so im unfamiliar with how accessible the head bolts are or if i might as well do the gasket...

Hello all,I have noticed my car is consuming coolant since switching to the Hx35 / E85 setup. Others have mentioned they see a spray from under the passenger side during a pull, my coolant overflow is on the passenger side of the car. Initially I assumed it was a head gasket issue. This past...

Hello everyone,I built my first DSM over the winter, was a pretty good experience overall. Currently runs and drives (don't have tags yet so it hasn't gone far) But I'm facing an issue with my cooling system that is leading me to believe I'm having head gasket troubles. When I built the motor...

Price drop: New, never opened, and still in packaging FelPro PermaToruqeMLS Head Gasket 1153-1.Head Studs: Sold Head Gasket: 200.00 Plus shipping and PayPal feesLocal pickup available in the Colorado Springs area.

I did a head gasket replacement on my 1994 Mitsubishi Eclipse 1.8L. Now let me start off by saying the head gasket was not blown but had an external leak at the oil jacket by cylinder #4. This was creating a river of oil down the side of the block and onto the bell housing of the tranny. Since...