The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support ExtremePSI
Reaction score
2

Latest activityPostingsAbout

    • Bubbadsm replied to the thread 2G 1g swap in 2g.
      It ran fine before I fix the leak. I’m getting every but a spark . Replace everything for the ignition side. Getting fuel and air still no spark
    • Bubbadsm replied to the thread 2G 1g swap in 2g.
      I tried that too car still don’t run
    • Bubbadsm replied to the thread 2G 1g swap in 2g.
      I did that test already I get spark
    • Bubbadsm replied to the thread 2G 1g swap in 2g.
      Believe I used the cam wire harness adapter and the ecu is 97+
    • Bubbadsm replied to the thread 2G 1g swap in 2g.
      It’s a black top cam sensor and the crank is 2g sensor
    • Bubbadsm replied to the thread 2G 1g swap in 2g.
      Crank sensor been replace but not the cam sensor
    • Bubbadsm replied to the thread 2G 1g swap in 2g.
      I’m getting fuel to the rail and cylinder. Pulled my spark plugs and they smelled like fuel so I don’t think I’m getting spark
    • Bubbadsm replied to the thread 2G 1g swap in 2g.
      Ok guys I been doing research and nothing has help so far. So I fix the oil leak but now the car won’t turn over. It cranks but that’s it. I replace the coils,wires, spark plugs and fuel injectors seals and still cranks with a no start. Any ideas...
    • Bubbadsm replied to the thread 2G 1g swap in 2g.
      That’s the only spot where the leak happens. Use screw claps and oem claps
    • Bubbadsm replied to the thread 2G 1g swap in 2g.
      Tired new clamps and hoes. Just confused why it’s leaking at the housing
    • Bubbadsm replied to the thread 2G 1g swap in 2g.
      Upper radiator hoes
    • Bubbadsm replied to the thread 2G 1g swap in 2g.
      Has anyone ran into the upper radiator hose leaking after doing the swap?
    • Bubbadsm replied to the thread 2G 1g swap in 2g.
      Does anyone know bout the 1g cas wiring or plug in play cas? I’m confused on how the wiring should be set up
  • Loading…
  • Loading…
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top