1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Trouble Logging In or Staying Logged In?

    CLEAR YOUR BROWSER COOKIES! More info about this can be found here. If you still have trouble after clearing your browser's cookies and cache, reply to that thread and tell us what browser you're using and what device you're using.

STRICTLY'S 2G FF Street Build Part 2

Posted by STRICTLY, Feb 1, 2018

  1. STRICTLY

    STRICTLY Supporting Vendor

    21
    75
    Joined Feb 18, 2010
    Kalamazoo, Michigan
    ... It's back!
    It's been a while, but now we're moved into our new space and this 2G is back from paint!
    Check out Part 1 of this build here: http://bit.ly/2Fx5rjd
    Here's a few shots from this past fall with the final mock-up before heading off to paint,
    at our old shop before our move to get you up to speed on this build...
    NtoPPTgl.jpg

    1EpxLy5l.jpg

    qUm98SSl.jpg

    9jlkyLUl.jpg

    qYU143al.jpg

    ksenCZYl.jpg

    AND NOW...
    Just got dropped off from paint, and it's looking fresh! Now it's time to get this back together!
    WiA4911l.jpg

    Qay1PQSl.jpg

    Here's the updated run down on this build...

    The Short Block
    STRICTLY BUILT 4G64 LR : http://bit.ly/2GBqouI
    Manley I beam rods W/625 Rod Bolts
    Manley Extreme Duty Pistons with HD Wrist Pins
    Stock 4G64 Crank
    ARP Main Bolts
    ACL HX Main and Rod Bearings
    Full Balance/Blueprinted Short Block

    The Cylinder Head
    STRICTLY BUILT Stage 2 Cylinder Head : http://bit.ly/2DS9UR3
    Kiggly Race Beehive Springs
    Kiggly HLA Regulator
    STRICTLY SS Valves
    Viton VSS
    K272 Cams
    STRICTLY Stage 2 P/P
    Revised Lifters
    ARP 625 Head Studs

    The Chassis
    Feal Suspension Coilovers : http://bit.ly/2GxL8mX
    Prothane Bushings
    STRICTLY 2g CTS-V Front Big Brake Kit : http://bit.ly/2EwkryC
    Tubed Front RAD/Intercooler/Head light Front End Setup
    Solid Engine Mounts
    Stitch Welded Front End

    The Bolt ons
    TRE Stage 3 Trans with 4 Spider
    STRICTLY Custom FF Manifold
    Treadstone TR1245 FMIC
    ECMLink V3 : http://bit.ly/2nmOuBm
    1/2 Koyo Rad
    FIC 1650cc Injectors : http://bit.ly/2FtBWP5
    Walbro 450 FP : http://bit.ly/2nAU3vs
    Aeromotive FPR : http://bit.ly/2nrHbIK
    Precision 6062 DBB T3 Turbo
    JMFAB Intake Manifold
    S90 70mm TB

    Now it's time to get this thing back together!
    zmgq11rl.jpg

    OAsbfERl.jpg

    iUPXQQvl.jpg

    JPDEfSVl.jpg

    0YkCZIFl.jpg

    0Cy9updl.jpg

    We'll be updating this thread periodically with progress on this build!

    Feel free to contact us if you have a project like this in mind!

    Check out our Engine packages here,
    //STRICTLY : http://bit.ly/2E2nW1E | DSMTuners : http://bit.ly/2zdHrzb

    If you didn't already see our machining thread : http://bit.ly/2E7UZli
    We also have a full in house machine shop to do any machining you may need, as well as control our turn around time on engine builds much more consistently.

    Thanks for stopping by,

    //Strictly Performance Motorsports
    269-350-9055 | Sales@StrictlyPerformance.Parts
    http://strictlyperformance.parts


    Thanks for staying tuned!





     

    Log in/Register to remove ads
    goonie90gsx, Ludachris, Teezy and 6 others like this.
  2. iugrad92turbo

    iugrad92turbo Proven Member

    10,318
    331
    Joined May 22, 2007
    Kalamazoo, Michigan
    So sweet.
     
    Loading...
  3. eclipse gsx

    eclipse gsx Proven Member

    181
    25
    Joined Apr 25, 2008
    penitas, Texas
    Nice!!! Looks effing clean man. Following this built!
     
    My DSM:
    1998 Mitsubishi Eclipse Spyder N/T (sold)

    Street Build

      automatic
    1997 Mitsubishi Eclipse GST (sold)

    Street Build

    16g   manual
    1995 Eagle Talon TSi AWD

    Street Build

    50trim   automatic
    Loading...
  4. joemamma

    joemamma Proven Member

    255
    42
    Joined Jan 26, 2017
    williston, North Dakota
    so sweeeeeet
     
    My DSM:
    1992 Mitsubishi Eclipse GSX

    Drag Race Build

    16g   manual
    1994 Eagle Talon TSi AWD

    Street Build

    T25   manual
    Loading...
  5. Jacolu3

    Jacolu3 Proven Member

    422
    48
    Joined Jan 31, 2015
    Lake Grove, New York
    Mint!!!
     
    My DSM:
    1997 Mitsubishi Eclipse GSX

    Drag Race Build

    11.734 @ 117.56 MPH
    Loading...
  6. Moonlight GSX

    Moonlight GSX Supporting Member

    245
    26
    Joined Nov 16, 2010
    Edmond, Oklahoma
    Now I understand the radiator placement, looks awesome when all assembled.

    Forgot to ask, is there a fan on the bottom as well for the radiator, or are you creating some type of ducting for it; unless the velocity of the air will naturally flow into and under the engine?
     
    Last edited: Feb 2, 2018
    My DSM:
    1995 Mitsubishi Eclipse GSX

    Street Build

    16g   manual
    1996 Mitsubishi Eclipse GSX

    Street Build

    T25   manual
    Loading...
  7. STRICTLY

    STRICTLY Supporting Vendor

    21
    75
    Joined Feb 18, 2010
    Kalamazoo, Michigan
    We have 2 10" fans with a shroud mounted on the back side of the radiator. We also have custom sheet metal ducting for the whole front mouth section that seals it all up very nicely.
     
  8. iugrad92turbo

    iugrad92turbo Proven Member

    10,318
    331
    Joined May 22, 2007
    Kalamazoo, Michigan
    I' gonna come in after work next week and see it.
     
    Loading...
    STRICTLY likes this.
  9. Moonlight GSX

    Moonlight GSX Supporting Member

    245
    26
    Joined Nov 16, 2010
    Edmond, Oklahoma
    If/when you get that bolted up I'd like the see the finished product, sounds like a lot of thought went into it (love it).

    Edit:
    Another question, I'm now trying to understand your thought process on the coolant lines... I've never seen it configured that way.
     
    Last edited: Feb 2, 2018
    My DSM:
    1995 Mitsubishi Eclipse GSX

    Street Build

    16g   manual
    1996 Mitsubishi Eclipse GSX

    Street Build

    T25   manual
    Loading...
  10. chrysler kid

    chrysler kid Proven Member

    1,481
    351
    Joined Dec 20, 2002
    Mckinney, Texas
    Stock axles? Manual trans, or auto.
     
    Loading...
  11. iugrad92turbo

    iugrad92turbo Proven Member

    10,318
    331
    Joined May 22, 2007
    Kalamazoo, Michigan
    Manual trans, I'm sure it' got upgraded strictly axles.
     
    Loading...
  12. Moonlight GSX

    Moonlight GSX Supporting Member

    245
    26
    Joined Nov 16, 2010
    Edmond, Oklahoma
    Disregard my above question, the main question I do have now is what water pipe are you using for this?
     
    My DSM:
    1995 Mitsubishi Eclipse GSX

    Street Build

    16g   manual
    1996 Mitsubishi Eclipse GSX

    Street Build

    T25   manual
    Loading...
  13. iugrad92turbo

    iugrad92turbo Proven Member

    10,318
    331
    Joined May 22, 2007
    Kalamazoo, Michigan
    9
     
    Loading...
  14. STRICTLY

    STRICTLY Supporting Vendor

    21
    75
    Joined Feb 18, 2010
    Kalamazoo, Michigan
    Some updated pictures from getting the firewall all setup and engine dropped in...
    ovDbX4ml.jpg

    6J67AiJl.jpg

    YU6BTNll.jpg

    xAEuogUl.jpg

    Ohvmy0Hl.jpg

    ehLv2pal.jpg

    Jsq96q9l.jpg

    GAj8pUZl.jpg

    1POIXw9l.jpg

    ODOLrVKl.jpg

    RTneZvdl.jpg

    rSbPizll.jpg

    VzP36k5l.jpg

     
    Teezy and goonie90gsx like this.
  15. STRICTLY

    STRICTLY Supporting Vendor

    21
    75
    Joined Feb 18, 2010
    Kalamazoo, Michigan
    We're running a custom built setup, featuring -20 AN lines for the coolant hook ups.
    FjyWGZel.jpg

    r4SgXqzl.jpg

    ZZ1y4NIl.jpg
     
  16. Moonlight GSX

    Moonlight GSX Supporting Member

    245
    26
    Joined Nov 16, 2010
    Edmond, Oklahoma
    I am literally at a loss for words... everything that I somewhat tried to imagine is literally right in front of me. I am impressed :applause:. Would I be correct in saying that it will retain the factory/aftermarket heater core coolant lines?
     
    My DSM:
    1995 Mitsubishi Eclipse GSX

    Street Build

    16g   manual
    1996 Mitsubishi Eclipse GSX

    Street Build

    T25   manual
    Loading...
  17. iugrad92turbo

    iugrad92turbo Proven Member

    10,318
    331
    Joined May 22, 2007
    Kalamazoo, Michigan
    I was nice to come by the shop and hang for a bit, that is going to be one sick dsm when its all said and done.
     
    Loading...
  18. DetroitStroker

    DetroitStroker Proven Member

    176
    38
    Joined Dec 22, 2012
    Detroit, Michigan
    Aluminum crank pulley?
     
  19. STRICTLY

    STRICTLY Supporting Vendor

    21
    75
    Joined Feb 18, 2010
    Kalamazoo, Michigan
    haha we knew someone would catch that LOL. We actually have a fluidamper for it that we will be installing shortly :)
     
    Teezy, Ludachris and DetroitStroker like this.
  20. DetroitStroker

    DetroitStroker Proven Member

    176
    38
    Joined Dec 22, 2012
    Detroit, Michigan
    Stellar build strictly! How many auto dsm’s have you guys had on the dyno?
     
    STRICTLY likes this.
  21. Ludachris

    Ludachris Founder & Zookeeper

    3,423
    385
    Joined Nov 12, 2001
    Roseville, California
    I like the coolant pipe mods... I was planning a modded coolant pipe on the 1g build to change the routing. It was going to elbow down almost immediately after coming out of the water pump, with AN fittings provisions for the turbo and the wastegate. Your execution is better than mine.
     
    My DSM:
    1997 Eagle Talon TSi AWD (sold)

    Street Build

    16g   manual
    1991 Mitsubishi Eclipse GSX

    Road Race Build

    12.450 @ MPH
    Loading...
    STRICTLY likes this.
  22. Ludachris

    Ludachris Founder & Zookeeper

    3,423
    385
    Joined Nov 12, 2001
    Roseville, California
    Wait a minute - this car doesn't have a DSM Profile created for it? Makes it way easier to see all of the info for the car in one spot, with the build thread attached to it. ;)
     
    My DSM:
    1997 Eagle Talon TSi AWD (sold)

    Street Build

    16g   manual
    1991 Mitsubishi Eclipse GSX

    Road Race Build

    12.450 @ MPH
    Loading...
    SAKJR likes this.
  23. Ludachris

    Ludachris Founder & Zookeeper

    3,423
    385
    Joined Nov 12, 2001
    Roseville, California
    Is that an 3g MR2 power steering reservoir? That's exactly what I had planned to do as well - create more space ahead of the motor for cooling and ducting, while upgrading the power steering system at the same time. The more details I see on this build the more I like where this is headed. Curious to see how you address temps on the header.
     
    My DSM:
    1997 Eagle Talon TSi AWD (sold)

    Street Build

    16g   manual
    1991 Mitsubishi Eclipse GSX

    Road Race Build

    12.450 @ MPH
    Loading...
    ChessmoDSM, jjw205 and iugrad92turbo like this.
  24. goonie90gsx

    goonie90gsx Proven Member

    119
    93
    Joined Jul 14, 2009
    Seville, Ohio
    Wow that paint work is beautiful I cannot wait to see this car out ripping awesome build guys!!
     
    My DSM:
    1990 Mitsubishi Eclipse GSX

    Drag Race Build

    547 whp   416 lb/ft
    Loading...
    iugrad92turbo and STRICTLY like this.
  25. STRICTLY

    STRICTLY Supporting Vendor

    21
    75
    Joined Feb 18, 2010
    Kalamazoo, Michigan
    We have had a few. We are wrapping up a build on a mild HP 400hp 93oct Auto build with a PTE 6062. Should be pretty solid.
     

Share This Page

Loading...


Log in/Register to remove ads

Support Vendors who Support the DSM Community
Ace Race Parts Archer Fabrication Best Used Tires Boostin Performance ECM Tuning ExtremePSI Feal Suspension Fuel Injector Clinic Jacks Transmissions Jackson Auto Machine JNZ Tuning Kiggly Racing Magnus Motorsports Miller Import Parts Morrison Fabrications OHM Racing RockAuto SouthBay Fuel Injectors STM Tuned Tire Rack VR Speed Factory White Shed Speed