Possible fit for 1st gen rack bushings

[pagosa dsm]

http://www.superpro.com.au/find/sup...shi-lancer-evo-1-2-3-1992-1996-/cid-999500375
I have been in communication with Super Pro in Australia with the possible of these bushings fitting the 1st gen rack . I will keep you posted.
Rick

 

[KiNg MaRtY]

Keep us posted.

 

[pagosa dsm]

I will e ordering them today
Rick

 

[pagosa dsm]

I got the Super Pro rack bushings in today. I fitted them with an extra rack I have in the garage and they fit. I will keep you all posted if they fit installed in the car
Rick

 

[turbotalon1g]

How much do these cost?

 

[pagosa dsm]

they cost me about $ 45 delivered. I got them from Rally Sports Direct in Salt Lake. I will try to install them today.
Rick

 

[eclipsh]

Uploading these for Pagosa DSM. They are on his car.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[pagosa dsm]

As you can see these bushing fit in my 92 Talon. The only change is that I used a left or drivers side clamp on the right side. Now I am planning a front end alignment to finish the project.
Rick

 

[turbotalon1g]

Give us some feedback on if it feels different. It will be interesting if there is noticeable feels.

 

[pagosa dsm]

I will, I have to get an alignment 1st then I will let you know
Rick

 

[GPLaserRS]

Any feedback on these bushings? Did they improve the steering feel at all? I just replaced mine with OEM bushings because I didn't even think to look into EVO I-III rack bushings as an option.

 

[pagosa dsm]

Any feedback on these bushings? Did they improve the steering feel at all? I just replaced mine with OEM bushings because I didn't even think to look into EVO I-III rack bushings as an option.

My OEM were in good condition so I couldn't say they made much improvement