Hub centric rings.

[spartan69x]

So I need to get a set of centric rings, but not sure what i need to measure to get the right rings. the rims i have are sport maxx, but beyond that no clue. any guidance or possible place to buy them would be nice.

you can see the rims in my profile

 

[MrBoxx]

Almost any tire/wheel dealer can get hub-centric rings from their wheel suppliers. What they'll need to know is the center bore size of the wheel and the hub size of the wheel bearing. If you can contact a Sport Maxx dealer, they'll be able to tell you the center bore size of the wheel and will most likely carry the rings.

Figure $20 or less for a set, depending on size and availability.

 

[spartan69x]

i'll check with belle tire or discount, ty.

 

[rshissler]

this is where i got mine Wheel Hub Centric Rings - buy wheel hub rings online from 1010tires.com in Aluminum ofcoarse

 

[93BLK_TALON]

To find out the size you need you simply measure the outer diameter of your hubs, the then inner diameter of the wheel's bore. As for place and price, you cant beat ebay. Its less than 10 bux shipped for a set of 4 made out of poly carbon, so no rusting, snapping, cracking issues. Ive been running my set for over 2 years now on crappy SF roads on stiff suspension without so much as a sign of wear.

 

[steve]

The DSMs use a 67.1mm center bore so as long as your new rims have larger bores than that you can get rings to fit. When looking the 67.1mm would be the ID of the ring and the OD would be whatever the rims center bore is.

 

[spartan69x]

Cool, tyvm!