turboglenn
15+ Year Contributor
- 6,375
- 123
- Nov 5, 2007
-
RIpley,
West Virginia
Well, after having read a LOT of info both on here and through google i can't quite find what i'm looking for.
It seems there are two different 58mm inducer 8 blade hx40 wheels, one has an exducer of 83mm and the other is around 86mm
thing i i see that the claimed airflow is only 60lb/min, but the hx35 8 blade has shown dyno results that would support that type of airflow (525+ hp)
So, i'mwondering what people have personally made for hp on the 58mm 8 blade with the 83mm exducer (or even the 86mm unit) It seems most people run the 6 or 7 blade hx40 and in comparison to the flow of other hx40 blades 60lb/min just seems a little under rated for a wheel of this size especially when smaller wheels of it's same family seem to do just as much as if not more when it comes to wheel horse power.
So, i really would just like to know what's the most some one has pushed out of a 58mm 8 blade hx40 wheel on a 2 liter engine
It seems there are two different 58mm inducer 8 blade hx40 wheels, one has an exducer of 83mm and the other is around 86mm
thing i i see that the claimed airflow is only 60lb/min, but the hx35 8 blade has shown dyno results that would support that type of airflow (525+ hp)
So, i'mwondering what people have personally made for hp on the 58mm 8 blade with the 83mm exducer (or even the 86mm unit) It seems most people run the 6 or 7 blade hx40 and in comparison to the flow of other hx40 blades 60lb/min just seems a little under rated for a wheel of this size especially when smaller wheels of it's same family seem to do just as much as if not more when it comes to wheel horse power.
So, i really would just like to know what's the most some one has pushed out of a 58mm 8 blade hx40 wheel on a 2 liter engine
Last edited:
