Need Inline filter to reduce pressure on rs49t Install?

[Lordpaxin]

Hello,

I am piecing together a build using a RS49t turbo.

My question is.

I have read several posts about excess pressure curbing spool times.
Do i need to find a way to reduce pressure for this turbo?

2g, feed from 02 housing.

would a Filter Mount Inline with my current oil feed line, designed to come off the L fitting on filter housing and screw into a threaded Nipple mounted inside the Feed port hole.

you all know the type i am talking about.

THanks.

 

[LilBeanTSI]

A filter is not neccessary with that turbo, just run the line right from the oil filter housing.

 

[Lordpaxin]

OK, another question.

On the turbo, It has a Fitting screwed into the chra already.
its brass, and the top is a female 1/8th npt fitting like it should have. but the inside of the fitting it has a metal Pin, a circle hole, with a squareish shaped Pin in it, is this a pressure reducer.

It was Installed by AGP and the turbo came with it. im just curous.

 

[LilBeanTSI]

I don't have an answer for that one. Call up AGP and ask for Ben he will tell you everything you want to know .