Opinions/Suggestions on my new turbo setup

[kelvinb]

1992 Eagle Talon TSi AWD

SAFC II
AFPR
Walbro 255 fuel pump
550's or 650's? tell me what you'd advise....
JRC FMIC 8" tall
2.5 custom steel IC piping
2g TB elbow
ported mitsu big 16g
felpro gaskets
2g ported exhaust mani
EVO III ported o2 housing
larger turbo outlet pipe

Tell me what you think. Again this isn't kelvinb it's his friend using his account since i dont have an available email address to use.

Thanks in advance

 

[Lunch_Box]

Seems like a good list. 550's will do the job. Do you have any exhaust work?

 

[OMN_DSM]

If your going to run real boost I would stick with 650's. I pushed my 650's to their limit running them with my old 16G setup.

 

[kelvinb]

If your going to run real boost I would stick with 650's. I pushed my 650's to their limit running them with my old 16G setup.

Many people have been telling me that 650's are not tunable with an AFC. So I am going to stick with 550's until the end of the summer when I go with the MS stand alone.

Seems like a good list. 550's will do the job. Do you have any exhaust work?

I plan on a custom 2.5" turbo back setup.