550cc or 650cc injectors for evo16g?

[91_talon_at]

which would do me more good to run with either a big 16g or evo 16g? i'm upgrading my turbo setup along wit fuel. i'm lookin at getin the ball/disk type injectors from FIC. 280 shipped for 550cc and 650cc for 330

 

[Clipse]

Originally posted by 91_talon_at
which would do me more good to run with either a big 16g or evo 16g? i'm upgrading my turbo setup along wit fuel. i'm lookin at getin the ball/disk type injectors from FIC. 280 shipped for 550cc and 650cc for 330

All you need is 550s, especially in a ball/disc style. You would just end up spending an extra $40 on the 650s, to tune them way down. And that's my .02

 

[zac83]

not to split hairs... but the big16G is rated for about 380 horses where the 550 injectors are good for about 360 horses. an evo 16G should flow slightly more but I dont have a HP rating for it. In reality, there arnt many pump gas cars that are tuned to run 360 HP on a 16G, but it's not a good practice to run the limit on your injectors - one good top speed pull can fry a set of nice 550s. If your planning on cranking your 16G up and running at the track, I would recomend going bigger, otherwise 550s should suffice.

Also consider this: if you ever look into using a MAFT or some other tool that increases pulsewidth for nitrous, your shooting yourself in the foot with 550s because they'll be maxed out way before they can deliver the extra fuel.

if your planning on turning it up that high anyway: make sure youve got the fuel pump for it also
Keep on Boostin