How exactly do I wire in the EVO maf into my 2g pigtail? Is there a wiring diagram out there that I can use? I know the EVO MAF is alot easier to tune than SD and you wont outflow them until your above 660hp that is what I was told anyways. If you have any info on this please let me know.

maffrequencylimits [ECMTuning - wiki]



havent seen much on that coversion.

So there isnt a wiring diagram out there for what wire goes where on the 2g to EVO MAF?

I looked havent seen one.

Yeah that is why I tried asking on here. Hope someone has one hiding somewhere in there dsm vault of diagrams .

Jeff Oberholtzer (keydiver) was making adapter cables, but he has stopped...making anything. He has shutdown the business. I am looking for one too.

Here is what I have in my notes regarding EVO VIII MAS Wiring.

Wiring Specification of Evo VIII MAS:

Pin 1 gray wire = +5 volts (closest to the turbo)
Pin 2 yellow/blue stripe= Barometer
Pin 3 white/red stripe= Airflow Hz
Pin 4 red/yellow stripe= +12 Volts from MPI
Pin 5 black= Ground
Pin 6 red/blue stripe= Intake Air Temp
Pin 7 blue/black stripe= Reset

The pin out of the EVO VIII MAS is the same as the 2g MAS, but the wire colors are different on the 2g.

1G___2g/Evo
1_______7
2_______3
3_______4
4_______1
6_______5
7_______2
8_______6

Ligo didn't have a answer to this question?

Everyone and there dog always ask Ligo for info. I wanted to give the guy a break for once. I especially ask him alot of stuff all the time . I did just buy his brand new FP3575 from him. Let the guy take a break every now and again he always looks like a walking zombie every time I see him.