The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

White Smoke, Replaced many parts

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

CPHunter

15+ Year Contributor
1,005
2
Aug 3, 2004
Winnetka, California
Every since ive got my Talon its been blowing out white smoke,I've replace, Pistons and rings,New Head, Injector ,check turbo for blown seal, and nothing has come out. on both heads that ive put on, ive notice that when i turn the car on, i get some fuild coming from between cyl 2-3.this has been happening before everything was changed and after. i can't figure it out. any ideas. ive been reusing the Cometics Head Gasket, is that the problem. i was told this head gasket was reusable. it has about 1000 miles on it.
 
If the problem continues then you might be looking at a warped block, or the block could have a gouge(spl?) in it and allowing antifreeze to pass over into the cylinder and outside of the head and block. If i'm correct white smoke is antifreeze and blueish white smoke is oil, dirty white/black is fuel. Fuel alot of time isn't a big deal, when your driving down the highway say in 5th and just cruising along then you down shift and punch it then you might have a little bit of black smoke roll out your exhaust nothing major that usually isn't a bad sign from what i know.. Someone correct me if i'm wrong please!

Fireshaker!
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest posts

Build Thread Updates

Latest Classifieds

Back
Top