A few problems. from boost leaks to high idle

[azkikr10]

Okay where to start. I did an intake leak test on my car and found a leak in my tb. i replaced the seals and now it doesn't leak, but my idle never gets below 1000. the screw is all the way down and im out of ideas. i checked my tps and it reads .46 ohms closed no matter where its moved to. I also noticed my injectors had an air leak so i replaced all the groments and O rings but the air leak just seems to be worse. I also cant go above 12psi to save my life. I noticed after i changed springs in my hallman mbc i get 15 vac at idle instead of the 20 vac. I had before. Can someone please give my some ideas on what i should check next? im really suck here. thanks in advance guys.

 

[oddrob]

If you have an air leak around an injector, that would cause your problems. Fix that for good and see where you go from there.

 

[azkikr10]

I don't know what else to try on my injectors though. all seals are new and my fuel rail isn't bent. what else can I do? is it possible the spacers that the screws go through expanded?