Where on the stock 2G wiring harness does the knock sensor connecter come out of?

[cait sith]

My knock sensor wires decided to split at the harness, and I need a good general area on the 2G wiring harness in the engine bay as to where they came out/connecter area to avoid having to jump the whole circuit to the ECU.

Any help would be appreciated, as I really don't want to have to have another stray wire going into the cockpit.

 

[Dallas J]

Once the wires go into the main body of the harness it would be real hard to get at just 1 wire.

Is there nothing left of the wires that went to the knock sensor? If not, it would be much easier to just run a new wire back to the ECU.

-Dallas J

 

[cait sith]

Once the wires go into the main body of the harness it would be real hard to get at just 1 wire.

Is there nothing left of the wires that went to the knock sensor? If not, it would be much easier to just run a new wire back to the ECU.

-Dallas J

I can't see any wires that come from the actual wire harness out. The connector has about two inches of wire coming off it with fizzled ends.

I guess I'll just have to jump it.