The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Idling problem and missfire

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ALP584

15+ Year Contributor
96
0
Sep 9, 2003
I have a weird idling problem plus on top of that the car shakes like it missfires when its idling up and down from 1k to 1.5 k i put new plugwires on the plugs are ngks almost new the biss screw was adjusted according to vfaq i even checked the isc i dont know what causes it i tried almost everything other than replacing the distributor so any help is appreciated
 
You know, I have had this problem for a really long time. And I cant think of anything I havent checked. It is getting really annoying. Sorry for jumping in on your thread, but if anyone has any ideas. Pass them along..... :cry:
 
does the engine shake alot?? try cleaning the egr it will get clogged with carbon and exhaust build up and cause a small misfire and idle surging. if the engine shakes alot and you'll know what i mean by alot. then you may have broken the balance belt. just a thought good luck! :thumb:
 
My engine likes to have the idle surge too...it sucks. I am getting an IAC and maybe that will cure it. If not then i am gonna do NGK plugs...get rid of my bosch crappie platniums, wires, and O2 sensor. My engine at idle shakes every once in a while ...it feels like after each rotation or whatever....like everytime u start it up it moves...well its kinda like that....just every 4 seconds or w/e...mostly when the idle surges to about 400 rpms... I did my timing belt and balance shaft belt about 2000 miles ago...I dont know if i trust my work though. Also when driving at a constant rpm u can feel it buck a little bit every once in a while....(as in every 5-10 secs...maybe misfire?) according to my gauge its at the last rich bar on it so maybe need new O2 sensor...if any ideas...plz let me know
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • Wanted 1g Chassis harnes fuse box
    • 92AWDHX40
    • Updated:
    • Expires
  • Wanted 4G63 WTB Evo 560cc injectors or 450cc
    Im looking to pick up a set of evo 560cc injectors or possibly a set of 450cc injectors if the...
    • eclipsemf
    • Updated:
    • Expires
  • Wanted 1g Looking for pn MB522081
    Looking for a factory 1g double din radio bezel pn MB522081
    • Kgilis
    • Updated:
    • Expires
  • For sale 2g 2g Talon drivers side airbag
    Drivers side 95-98 Talon airbag. Excellent condition. Can ship UPS ground. Message...
    • Galant665
    • Updated:
  • For sale 2g 2g Talon tail lights.
    Pair of 2g OEM Talon tails. Decent condition. Not show quality. Right has a section on bottom...
    • Galant665
    • Updated:
Back
Top