The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

gritty/grey sludge in oil pan???

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

blackGSX2g

DSM Wiseman
3,334
88
Apr 30, 2004
Kalamazoo, Michigan
Well, my 7-bolt had a catastrophic problem, so I'm building up a 6-bolt and swapping it in. I still never figured out what went wrong with the 7-bolt, dealer said it was a balance shaft, but they are all fine :rolleyes: Anyways, I took it all apart and I found a lot of grey sludge with the consistincy of orange clean hand cleaner...very bad for oil!! Sad thing was, it was mostly by the oil return line from the turbo :thumbdown How bad do you think this is? The turbo is about 3-4 days old and has no shaft play, but doesn't spin as freely as it did. Could this be because its been sitting without oil for 2 months, or because its f*$#ed.
 
what was it doing before it died?

turbo could be like that from sitting around - spray some oil down the feed hole
 
Yea, I took the 7-bolt out and kicked it. The 6-bolt is on the engine stand as we speak getting fresh everything. I was just wondering if it messed up the new turbo.

The turbo wasn't acting up at all when it died, but I did notice some oil smoke...but that could have come from anything. I tried putting some oil in it awhile ago, and it looked like it dripped out of the exhaust turbine :cry: I dont' know if it was there before or what, but I'll clean it all out and do it again to see if it helps.

Thanks
 
blackGSX2g said:
Yea, I took the 7-bolt out and kicked it. The 6-bolt is on the engine stand as we speak getting fresh everything. I was just wondering if it messed up the new turbo.

The turbo wasn't acting up at all when it died, but I did notice some oil smoke...but that could have come from anything. I tried putting some oil in it awhile ago, and it looked like it dripped out of the exhaust turbine :cry: I dont' know if it was there before or what, but I'll clean it all out and do it again to see if it helps.

Thanks

make sure to get that bs outta your 6 bolt while you have the chance!
 
I agree with Defiant. Gray material is usually from outer bearing layers.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
  • Wanted 4G63 800cc injectors
    Im looking for a set of injectors that are at least 800cc. Thanks!
    • DSM_Thorpe
    • Updated:
    • Expires
  • For sale 2g 2g rear brace arms
    2g rear subframe brace arms. Missing one of the bushing spacers. No rust. Had someone looking...
    • Galant665
    • Updated:
    • Expires
  • For sale 1g 1GB Eclipse Tail Lights
    1GB Eclipse Tail Lights $80 + shipping and paypal fees* not flawless but in very good shape...
    • jersygsx
    • Updated:
    • Expires
Back
Top