Turbo Installed.. But No Spark

[GSXeclipsePSI]

Hey..

I posted like 2 weeks ago about my BIG16G Install. OK.. Now my car is all done... all togather... Turn the key to prime the oil system.. Ok... Plug everything up and ready to run this sh**.... Just keeps cranking and cranking... No Start .... So now I'm left to list it hurr in hopes of some help... I listed what I have install wit this upgrade.

1. Big16G & Related Parts
2. SuperAFC-2
3. OBX Fuel Pressure Regulator (40psi)
4. Walbro 255hl fuel pump
5. 550cc Injectors

Now I didn't check coil's 4-1 but 2-3 did have spark. I unpluged my AFC and connected the 02 wires again... Nothing.... So someone please offer some suggestions!

Thanks
kendel

 

[SlowSpyder]

are you getting fuel? check the connections on the fuel pump

 

[mazdamx6pwr.com]

Sounds like you have alot of fuel related mods. Do you have a fuel pressure guage?

 

[GSXeclipsePSI]

hey... Yeah it has a gauge.. i had to turn it up and shit.. But it seems to be getting fuel. It's really weird. I have 2 friends that are good in fixing DSM's since both have owned like 7 of them between the 2. My friend did bend the fuel line alittle by the fuel pump. The aluminum line after the fuel pumps rubber (from under the car)... Thats the only thing I have to add really.... and there is a slight crimp in the fuel pressure regulator house... I'm confused...

CORRECTION FROM 1st POST. I DIDN'T have spark on coil pack 2-3.... This might help!