The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

gauge problem

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mdctalon

15+ Year Contributor
76
0
Mar 6, 2004
Alta Loma, California
ok i have a 1g talon, and i decided to change the guages to the reverse style. when i was all done i had a problem with my speedomoter needle it went from being accurate to being 15 mph off

any suggestions are apriciated.

thanks.
 
Yea whenever you take off your needles you gotta recalibrate them. The best way to get it accurate is to find a really open stretch of road, and you and your buddy go driving side by side, at the same speed. Then manually take off the needle and place it at the speed you guys are driving. Hows all your other gauges? For fuel, fill up with a full tank and give it time to re-adjust, then put the needle at full. For temp, wait for your car to warm up and put the needle at what it usually is at. Etc, etc, etc.
 
Yea but I would still test it out anyway like I described, you don't want to be going 60 when you think your going 40 and you see blue lights flashing...;)
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top