50 shot or 100 shot

[badas93tsi]

I searched around and couldnt find anybody with similar mods using nitrous. Starting from the top, HKS 272's, slight ported head, Eagle rods, Venolia "race" pistons, 770cc injectors, s-afc, mbc, fmic, and an ETE32(be nice I know its junk). What would be the best jets for my setup. The car has dynoed 309 to the wheels before the cams. Any help would be appreciated.


by the way im running 20psi

 

[bytheway]

100 shot should be fine if its a wet shot

 

[badas93tsi]

any suggestions on a brand, I was thinking NX????? Are they very involved to install, i.e fuel line splicing and stuff? just a ?

 

[drk mrk iv]

Nx is very good. Pretty simple and straight forward install. I've done two kits and both are easy. Wet shots pack a lot of torque as well (at least for 4.6 motors).

 

[badas93tsi]

thanks for the help, keep it coming

 

[Tom N]

You can run a 100 shot without a problem. If its set up right.
As for the jets the fuel jet will depend on what your base fuel pressure is.

 

[highintenzity4]

Easily handle a 100shot.... Do you guys recommend the stage 1 n2o kit or the direct port?

 

[Tom N]

You will be fine with a fogger nozzle. A direct port is alot harder to change out the jets when tuning unless you have a sheet metal intake with the n20 bung on top. Even then it will be harder.

 

[badas93tsi]

not exactly sure how it works, how does it add the extra fuel?

 

[Tom N]

not exactly sure how it works, how does it add the extra fuel?

Don't take this the wrong but if you really don't know that then you have no business using nitrous.

 

[Generation X]

I run a Zex 75 wet shot along with a ported FP B28 @ 21psi, and HKS cams, I have had no problems whatsoever. All on stock motor.

 

[badas93tsi]

i did take it wrong, i assume everyone just wakes up knowing everything about nitrous huh, if i knew everything i wouldnt be here asking questions would i?

 

[Generation X]

i did take it wrong, i assume everyone just wakes up knowing everything about nitrous huh, if i knew everything i wouldnt be here asking questions would i?

That would be very correct. That's what I thought the forums were for. This is the first time that I have ever used nitrous as well. I've went through about 2 bottles so far. Good luck!

 

[badas93tsi]

thanks for the help guys, i guess not everyone here is an a$$

 

[badas93tsi]

I got my kit, most of the hard stuff done, trying to figure out where to put the solenoids. Any ideas or pictures?