The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support ExtremePSI

UPPer timing belt cover bolt size

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

The (2) bolts that fasten the timing cover down to the top of the valve cover should have a 16mm long shank.
The (1) bolt for the firewall side of the timing cover should have a 25mm long shank.

Should all be 10mm socket size also.
 
Combined, the two above posters are correct.

For everything else on the 6-bolt timing cover:
 

Attachments

  • 1G_6bolt_TimingCoverBolts.JPG
    1G_6bolt_TimingCoverBolts.JPG
    41.7 KB · Views: 2,191
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top