The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Car died and now won't start...

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

talonguy2005

Probationary Member
2
0
Sep 11, 2005
Munroe Falls, Ohio
So i was on my way to get the emission check for the car and it just died.

The car is a 1992 plymouth laser rs 2.0 N/T

The CAS had to be adjusted really far out of the normal spot it was to get the car running before emmisions.

Before adjusting it, I was on the freeway when the car was sputtering and I couldn't rev it at all, it would just idle like crap. Then we got it towed, then adjusted the CAS and it was running again.


Well I am getting spark, compression, air, but not so sure im getting fuel out of the injectors....

any help would be awesome.
 
But if your cam timing is on you shouldn't have to adjust the cam sensor at all. Your obviously having to compensate for something being off.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top