turning a non turbo to a turbo set up,, any ideals,,

[foxsdesignz]

i cant go all out like i planned on, but this is what i would like to do, get a non turbo 1g engine and put my turbo stuff on it, manifold etc,,,, beside what i found out that there is no oil jet in the non turbo engines, it this true with all of the non turbo 4g63,

 

[jrohner]

The pistons are 9:1 compression and are supposedly not as strong as the low-compression turbo pistons. There have, even recently, been a bunch of threads on this exact thing.

 

[Nihad]

You know what would be good is to do a none turbo 6bolt or a 2.4 over the 2.0 non turbo and swap a turbo head on it and the 14b or t25 good size manifold and a 6bolt intake mani 60mm t body and some 450-575cc would work great...

 

[Nihad]

Then you would have higher compression with a smaller turbo. then have a huge turbo and a lower engine compression... The 6bolts have ridiculously low compression...

 

[black_dsm_90gsx]

I'm using a non turbo Hundai block on my gsx, when my 4g63 block spun a rod bearing. 20 psi on a 16g and still going strong. Just make sure you have the proper fuel set up.